| Seat width | Measure the widest part of the seated hips or thighs while wearing normal indoor clothing. | Choose a seat width equal to the body measurement plus 2–5 cm total clearance. This is approximately 1–2.5 cm on each side. | Hip width of 44 cm → recommended seat width of approximately 46–49 cm. | Allows comfortable clothing, minor posture changes, and safe pressure distribution without excessive lateral movement. |
| Seat depth | Sit upright with the back against a firm surface. Measure from the back of the buttocks to the back of the knee. | Choose a seat depth about 2.5–5 cm shorter than the measured buttock-to-knee length. | Buttock-to-knee length of 48 cm → suitable seat depth of approximately 43–45.5 cm. | Prevents the front edge from pressing behind the knees and leaves room for circulation. |
| Seat height | Measure from the floor to the top of the seat cushion while wearing the shoes normally used with the wheelchair. | When seated, the feet should rest securely on the footplates, with the knees close to a natural right angle when the seat is upright. | A lower seat height may suit shorter users; a higher seat height may improve transfers for taller users. | Influences transfers, foot support, stability, and the ability to reach tables or work surfaces. |
| Backrest height | Measure from the seat surface to the top of the shoulders or the desired upper-back support point. | Select a backrest that supports the trunk without restricting shoulder movement. A headrest should support the head during recline. | Users needing trunk stability may require a higher backrest than users with good independent sitting balance. | Reclining changes the user’s center of gravity and increases the need for stable trunk and head support. |
| Armrest height | With shoulders relaxed, measure from the seat surface to the underside of the elbows while the elbows are bent at approximately 90 degrees. | Armrests should support the forearms without raising the shoulders or forcing them downward. | Adjustable armrests are useful when the user needs different support positions for driving and reclining. | Correct height can reduce shoulder strain and improve upper-body posture. |
| Footplate position | Measure from the back of the knee to the bottom of the heel while seated. | The footplates should support the full feet, with the knees and hips remaining comfortable when the chair reclines. | Elevating leg rests may be useful when swelling, limited knee extension, or prolonged reclining is expected. | Poor foot support can increase pressure under the thighs and cause the pelvis to slide forward. |
| Recline range | Check the chair’s stated backrest recline angle and whether the leg rests elevate independently or together with the backrest. | Choose a range that matches the user’s medical and daily positioning needs; common powered backrest ranges extend from upright to approximately 45°–55°. | A user who naps or requires pressure relief may need more positioning flexibility than a user who reclines only occasionally. | Recline changes pressure distribution, visual height, reach, and the chair’s overall footprint. |
| Overall width | Measure the narrowest doorway, elevator, hallway, and turning area along the planned route. | Compare the chair’s complete outside width, including wheels, armrests, and attachments, with the available clearance. | Do not rely only on the listed seat width; the overall chair width is usually wider. | Ensures the chair can enter the home, bathroom, elevator, and other frequently used spaces. |
| Overall length when reclined | Measure the available space behind and in front of the chair with the backrest fully reclined and leg rests extended. | Leave enough room for the complete reclined footprint without blocking doors, pathways, or emergency access. | A chair that fits upright may require substantially more floor space when fully reclined. | Prevents collisions with walls, furniture, door swings, and other household obstacles. |
| Weight capacity | Include the user, clothing, cushions, bags, medical equipment, and other items carried on the chair. | Select a rated capacity that exceeds the combined everyday load; never exceed the manufacturer’s stated limit. | User weight of 105 kg plus 8 kg of equipment → total expected load is at least 113 kg. | Capacity affects safety, braking, stability, durability, and the performance of the seating system. |
| Pressure and posture check | After sitting for several minutes, check pelvic position, thigh support, heel placement, and contact with the backrest. | The pelvis should remain positioned against the backrest, with no concentrated pressure behind the knees or excessive side-to-side movement. | Recheck the fit in both upright and reclined positions. | A correct upright fit may change when the backrest or leg rests move. |